Our company has German TRUMPF 100 ultra laser cutting machine, Japan AMADA laser cutting machine, can be for the sub-thick plate material, do not need to use molds, can be any shape of steel plate for processing, and no burrs, smooth surface.

Guangdong Dongji Intelligent Device Co., Ltd owns 3 imported laser cutting machines, with power of 6000w, 3000w and 2000w. The laser cutting incision is narrow, the two sides of the incision are parallel and perpendicular to the surface, and the dimensional accuracy of the cut parts can reach ±0.1mm. The cutting surface is smooth and beautiful, and the surface roughness is only tens of microns. Even laser cutting can be used as the last process without machining, and the parts can be used directly. After the material is laser-cut, the width of the heat-affected zone is very small, and the properties of the material near the cutting seam are hardly affected. The workpiece deformation is small. The cutting precision is high.The geometrical shape of the cutting seam is good, and the cross-sectional shape of the cutting seam is relatively regular rectangle.

Equipment/Common Specifications of our machines:

* Germany TRUMPF Bystronic laser cutting machine
 * Japan AMADA laser cutting machine
 * Power 3000W/5000W
 * To small clearance 0.1MM
 * Material thickness: 25mm (carbon steel), 30mm (stainless steel), 20mm (aluminum)
* Working range: 3000mm x 1500mm

The above is an introduction to the relevant content of the Sheet Metal Fabrication-laser cutting.
 Dongji focuses on sheet Metal fabrication more than 12 years, and makes different kinds of metal box (SPCC, stainless steel, Aluminum,Galvanized Steel box) according to customers' drawings.
All OEM orders for metal box, metal cabinets, stainless steel housings and aluminum cabinets are welcommed.